Aluminium Extrusions Manufacturers in India

State-of-the-art Manufacturing facilities
The modern plant is equipped with an automatic PLC controlled 2750MT Cheng Hua press, 1650 MT Wean United and a compact 980 MT Year Chang make Oil hydraulic extrusion press with flexibility to extrude 6”, 7”, 8” and 9” diameter billets. All presses have close controls on the speed and a high degree of stability. They are supported by Hot Log Shear from Granco Clark, USA, automatic puller and handling systems, producing extrusions which are bent and twist-free.
The belt system used for handling the aluminium extrusions keeps the soft metal scratch-free and shiny! The billets for extrusion are cast in-house in a DC Caster, in the right chemical composition, filtering the molten metal through ceramic filters to achieve a high degree of cleanliness and grain refinement for best end-use results.

Parameters Press-1 Press-2 Press-3
MAKE Wean United (USA) Year Chang (Taiwan) Cheng Hua (Taiwan)
Strength of extrusion press (TONS) 1800 960 2750
Diameter of billet 203 mm 152 mm 228mm & 203mm
Diameter of container 210 mm 158 mm 236mm & 210mm
Diameter of main Cylinder – Inches 37 25 44.48
Diameter of small Cylinder – Inches 9 7.087 9.09
Maximum pressure of Press (BAR) 3000psi 3000psi 3335psi
Mark of Billets (6063-6060) 6063, 6005, 6105, 6061 6063, 6060, 6101, 6005, 6351, 6061, 6082
Conveyor Length 36Mtrs. 36Mtrs. 50.90 Mts
Type of Billet Oven (gas, diesel, induction) Hot log shear Induction Hot log shear
Type of Puller Track type Track type Track type